NX-5700HB/5800HB NEXEDGE VHF/UHF DIGITAL TRANSCEIVER
One NEXEDGE radio, multiple protocols*: the NX-5700HB (110 W) / NX-5800HB (100W) mobile transceivers support NXDN and P25 (Phase 1 & 2) digital protocols, plus FM analog for mixed operation. This high-power RF deck - equipped with Bluetooth®, GPS and a memory card slot - requires one of several optional remote control heads, all of which offer an intuitive controls for easy operation. The versatile NX-5700HB/5800HB can be combined with other RF decks and multiple remote control heads to create a radio system that is tailored to your interoperability requirements.
*Note that, unlike NEXEDGE 50W-class models, the NX-5700HB/5800HB mobile series does not support DMR.
Features:
- Multi-digital Operation in NXDN and P25 (Phase 1 & 2) protocols
- Multi RF Deck with Low Band / VHF / UHF / 700 & 800 MHz combination
- Mixed Digital & FM Analog Operation allows gradual migration in mixed sites and easy migration with digital radios in other sites
- Variety of Optional Remote Control Heads (Note:NX-5700HB/5800HB is remote operation only)
- - Dual Remote Control Head and Multi-band (Multi RF deck) capable options
- - Easy-to-follow controls and Information Conveying Multi-line Text are built into each control head
- Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
- Built-In GPS Receiver for effective fleet management
- Built-in Bluetooth 4.0 for hands-free operation
- USB Micro Terminal (up to 12 Mbps)
- - PC Programming & Internal microSD Access (Requires USB driver for PC)
- Renowned KENWOOD Audio Quality can be achieved with Active Noise
- Reduction that utilizes built-in DSP for suppression of ambient noise
- Built-in 56-bit DES encryption
- Optional 256-bit AES encryption
- microSD/microSDHC (Up to 2GB/32GB) Memory Card Slot for increased
- memory capacity for "Voice & Data"
- RF output power: VHF: 110 W to 25W / UHF: 100 W to 25 W
- DB-25 & Molex 9-pin Accessory Connector
- AMBE+2™ Enhanced Vocoder
- 12 W Audio Output
- IP54/55 and MIL-STD-810 C/D/E/F/G
Models
| Model | NX-5700HB | NX-5800HB |
General Features & Programming
| Pre-set Frequencies : Type 1 | 136-174 MHz | 450-520 MHz | |
| Max. Channels per Radio | 1024 (Up to 4000 CH with option) | ||
| Number of Zones | 128 | ||
| Max. Channels per Radio | 512 | ||
| Channel Spacing -Analog -Digital | 12.5 / 15 / 20 / 25* / 30* kHz 12.5 / 6.25 kHz | 12.5 / 25 kHz 6.5 / 12.5 / 6.25 kHz | |
| Power Supply | 13.6 VDC ±15 % | 13.4 VDC ±15 % | |
| Current Drain Standby RX TX | 1.3 A 3.3 A 28 A | ||
| Operating Temperature(Radio only)*2 | -22°F to +140°F (-30°C to +60°C) | ||
| Dimensions -Radio w/Control Head | 7.01 x 2.56 x 13.84 in. (178 x 65 x 351.5 mm.) | ||
| Weight -Radio w/Control Head | 12.1 lbs (5.5 kg) | ||
| FCC ID | Type 1: K44499200 Type 2: - | Type 1: K44499300 Type 2: K44499301 | |
Transmitter
| RF Power Output | 110 W to 25 W | 100 W to 25 W | |
| Spurious Emission | -80 dB | ||
| FM Hum & Noise | Analog @ 12.5 / 25 kHz: 45 dB / 50 dB | ||
| Audio Distortion | 2% | ||
| Emission Designator | 16K0F3E*, 11K0F3E, 8K10F1E, 8K10F1D, 8K10F1W, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D | ||
Optional Accessories
Antennas
 |
GPS Antenna GPS Antenna |
Cables and Miscellaneous
 |
Handheld Control Hea |
 |
Featured Control Head |
 |
Basic Control Head Kit |
 |
Control Head Interface Kit (adapter for the Head) |
 |
Remote Control Cable (available in 3 lengths of 17ft (5.2m), 25ft (7.6m), 1.6ft (0.5m)*) |
 |
DC Power Cable |
 |
Ignition sense cable |
 |
Mounting Bracket |
 |
OTAP Manager |
|
Secure Cryptographic Module |
Microphones & Headsets
 |
Microphone |
 |
Keypad Microphone |
 |
External Speaker (40 W max input, requires KAP-2) |
